Products

FLAT (TRAPEZSİZ) COLD STORAGE PANEL LOCK POLYURETHANE

GENERAL refrigeration cold room panels and prefabricated locked features are produced. 40 kg/m3 (±%5) density polyurethane injection. Length of 2 m to 12 m, 80, 100, 120, 150, 200 mm thickness are produced. Standard panel widths of 111 cm width standard panels can be manufactured to be locked.

Panels antibacterial and hygienic. Cold room panels manufactured by GENERAL cooling as well as superior quality and long life, easy installation can be done quickly and properly designed qualities.
 
 

Cold storage, floor panels, the interior surface of the 12 mm thick, the surface layers, original birch tree, non-slip, moisture-resistant, hygienic and practical, easy to maintain, upper side dark brown, hexagonal pattern with a density of 240 g/m2 phenolic resin coated plywood, exterior surface is 0.50 mm thick hot-dipped, galvanized sheet metal.

Polyurethane Lock Detail
 
Cold storage, roof, wall and floor panels, and also double-plug interconnect with eccentric lock.

Cold storage, Polyurethane Panel Joint Detail
 
01. polyurethane
02. Sheet
03. Floor Fixing Accessory
04. Floor - Ceiling
05. steam Holder
06. insulation Material
07. greenhouse Nylon
08. Welded Wire Mesh
09. concrete
10. Sanitary Accessories
11. Outer Corner Accessory
12. Polyurethane Filling
13. Internal Corner Accessory
14. Custom Aluminum Rivets
15. rivet
16. Top Cover Accessory
17. M10 Stud
18. M10 Square Special Nuts
19. Aluminum Suspension Profile
20. Silicone Sealants and Channel

Polyurethane Panel Thickness and K values
 
GENERAL REFRIGERATION 7 different thickness for the intended use in accordance with the cold room, the panel produces.

HINGED (SHOCK) COLD STORAGE DOOR

The most worn-out parts of cold storage doors. Therefore, endurance is the most important feature, but easy to use, and lightweight durability, the two factors can not be ignored. Cooling is designed to provide these features Barlas doors, hinged and sliding the two types are available. Pre-painted galvanized steel (BGS), stainless steel (INOX) and glass fiber reinforced polyester (GRP) surface alternatives are produced.
 
Door Wing: the use of wood in between the two sheets 40 (+ / -2) density polyurethane is injected.
 
Door Thickness: Normal cold room 68 mm, 92 mm in frozen storage tanks.
 
Lock: imported goods, and the antipanic handle with opening fosforludur is locked from the inside.
 
Hinge: Rising and adjustable type.
 
Surface Plate: standard wings on both sides of PVC sheets. Optionally, polyester coated steel and can be CrNi.
 
Door Box: Industrial panel rooms, special door frame is produced in a wall of the room. This panel is mounted on the door leaf has a problem with the assembly. Special PVC panels for cold storage rooms are not used in the exterior and aluminum inner frame. Wing is the case for the application is very easy to mount.
 
Thermal Bridge: with a special rubber gasket around the door seal is provided. Housing is available in the frozen gates frost resistance, resistance diode transformer also does not want to be.
 
Size: 100x200 cm net migration can be produced until the desired degree.

Slide (Sliding) Cold Storage Doors
 
Cold storage Sliding Doors,
 
Door Wing: the use of wood in between the two sheets 40 (+ / -2) density polyurethane is injected.
 
Door Thickness: 92 mm normal cold storage, low temperature storage 120 mm.
 
Hanging Hardware: Carrier rail, wheels, handles and necessary accessories, composite material and stainless steel.
 
Surface Plate: standard wings on both sides of PVC sheets. Optionally, polyester coated steel and can be CrNi.
 
Thermal Bridge: Normal maintain a single row of rooms at a special rubber gasket that surrounds the leaf. Freezer cold room, vault doors ranging from easy resistance is required.
 
Door Frame: special PVC outer case, inner case made ​​of aluminum.
 
Dimensions: 250 x 300 cm net migration can be produced until the desired degree.

Cold Storage double wing-bar gate (Filip - FİLAP)
 
Can be wall mounted panel and double-leaf blades that can be opened 180 degrees in either direction and, if necessary open a permanent stand, 40 mm blade thickness, polyurethane-filled, windowed or windowless, service transition, business transition gates are used.
 
Double birds up to 200x250 cm net migration produced.

Door Wing: the use of wood in between the two sheets 40 (+ / -2) density polyurethane is injected.
 
Door Thickness: Normal cold rooms 92 mm, 120 mm in low temperature storage.
 
Hanging Hardware: Carrier rail, wheels, handles and necessary accessories, composite material and stainless steel.
 
Surface Plate: standard wings on both sides of PVC sheets. Optionally, polyester coated steel and can be CrNi.
 
Thermal Bridge: Normal maintain a single row of rooms at a special rubber gasket that surrounds the leaf. Resistance ranging from frozen storage room doors are very easy to necessary safety deposit box.
 
Door Frame: special PVC outer case, inner case made ​​of aluminum.
 
Dimensions: 250 x 300 cm net migration can be produced until the desired degree.

Controlled Atmosphere Cold Storage Doors
 
All technical specifications are the same as sliding doors. Made of a special composite material, reinforced door frame. Special sealing gasket is used.
 
-5 ° C up to room compatible. In addition, these doors to be able to control the atmosphere in the room are also available observation window that provides 100% leak. Standard size 200x250 cm net passing.

In daily life, even if they are in front of the very eyes, cold storage sector is large enough to affect the economies of countries.

Between production and consumption of goods and perishable foods cold storage and cold are the most critical process. Cold storage process to the quality of the manufacturer, both agents, as well as the consumer direct business. Therefore, seriousness and cooling sector, continuity and responsibility.

With every kind of project unlimited production capacity cold storage plant in a form that allows solutions. volumes of cold storage panels, cold storage and product processing areas with the desired sizes can be created. Prefabricated reinforced concrete or steel frame construction, was established under the cold storage panels for protection from any outside wall, there is no need. Panels operate in the external environment.

Each of these plants, cold room, cold storage equipment one thinks special projects, such as the central cooling system can be applied by key. Examples of applications of this type, meat processing plants, poultry processing plants, fish processing plants, fruit and vegetable processing plants be displayed. This plant products, certain actions by the shock or the product is passed, and then subjected to rapid cooling processes time to wait for the shipment shall be kept in cold storage and frozen product storage enclosure.
 
Also just a cold or frozen for preservation by cold storage facilities as a turnkey
 are implemented. This type of place which stores all kinds of all sizes can be manufactured to meet your needs can be given.

Consumption in the production of this chain that connects to consolidate GENERAL focused on three main points.
 
* High-tech, long-lasting and energy-efficient systems, protection of product quality.
 
* Design, installation and service, effective customer service.
 
* Monitoring systems and the effective operation of cold storage

Ice rink; concrete on the ground 10 cm. with a thickness of thermal insulation to stayrofor, isolation on disposal of approximately 8-10 cm of concrete, and laying it on the concrete walls on both sides by $ pipes are cooler.
 
Circus etc. After working for a certain period of time, such as concrete, not released to the last tracks to be moved, but the permanent and the ice melted after the runway intended to be used for other purposes, in order to achieve a better quality ice ice formed concrete floor must be strong.
 
Chillers are used to cool the track "Chiller Groups" to the position of the track freon or ammonia gas, is produced as air or water cooled.
 
Groups cooled brine chiller is pumped from the runway to freeze to -20 Cg carried out with a mixture of mono ethylene glycol water.
 
Made by us in Ankara (BELPA) Municipality Ice Rink freon gas, water cooling condenser, Izmit Municipality Ice Rink ammonia gas, water cooled condenser, air cooled condenser freon gas as the other small tracks were made.
 
Our work:

* Water and brine chillers

* Ice Skating Rink
 
* Project

* Manufacturing

* Installation
 
* Bİşletmeye-making
 
* Service (subsequent to commissioning service organization, so as to ensure the operation of the facility are non-stop.)

Cold Storage Racks
 
Cold rooms providing a complete hygienic conditions racks HACCEP certified.

Purpose of Use
 
Hot-Cold weather reduces losses. Energy savings and economic efficiency increases. Property bird, fly, insect and protects all flying insects. Such as smell, gas, dust, and so on. Reduces the movement. Operation hygiene. Easy to install. Source panes afford to cut harmful light source. Transparent to light for a safer work environment. Isolates noisy machinery. Requires minimum maintenance.
 
Uses
 
* Factory inside or outside the main doors,
 
* Staff entrance and exit doors,
 
* Installing the gates,
 
* Kitchen gates,
 
* Paint the gates,
 
* Source and steam compartments,
 
* Production panes
 
* Cold air tank and freezing room entrances and on the Turkish Food Codex accordance with Conveyor Belt Systems ..
 
PVC Strip Door Systems is fully compliant with the Turkish Food Codex and the relevant directorates. Food production, consumption and control, and related legislation by Decree Law No. 560 on the restructuring of food is the ideal solution for businesses. Especially in the food sector enterprises PVC Door Systems are recommended for a healthy and clean environment.

Split Type Hermetic condenser unit are suitable for cold room refrigeration and shelf where the low capacity requirements. Its small compact design, installation and maintenance is easy. Sound pressure levels are minimized.